Taiwan Machine Tools Manufacturers Sources


	SHIN CHANG YIE MACHINE WORKS CO., LTD. Shin Chang Yie (SCY) Machine Works Co., Ltd. специализируется на производстве оборудования для литья под давлением в Тайване с 1966года. На протяжении четырех десятилетий происходило развитие продукции, от первых литьевых машин с ручным управлением, через полуавтоматические модели к машинам с помощью компьютеризированным управлением. Компания Shin Chang Yie (SCY) будет рада продемонстрировать вам превосходное качество своей продукции.
	www.scyinj.com \| ПРОДУКЦИИ \| Сопутствующие товары \| ВІДЭА

MSIIA Series

Please visit our on-line digital catalogs for details.

Features

Available in double loops or triple loops to meet diversified requirement of production cycle time.
Screwing (material charging) is in process during mold open/close (and) ejection, which can substantially shorten the production cycle time, increase production output.
Equipped with shut-off nozzle, it can effectively prevent it from material leakage.

ITEM/MODEL		UNIT	110 MSIIA		140 MSIIA		180 MSIIA		200 MSIIA
Injection Unit	Screw Diameter	mm	36	40	40	45	45	50	50	55
	Injection Pressure	kg/cm²	2081	1879	2155	1703	2062	1771	2047	1692
	Theoretical Shot Volume	cm³	183	226	264	334	397	491	530	641
	Shot Weight Of Injection (PS)	g	163	202	235	298	354	438	472	570
	Injection Rate	cm³/sec	128	139	160	182	195	216	220	245
	Plasticizing Capacity (PS)	kg/hr	48	68	86	106	120	145	155	178
	Screw Rotation Speed	rpm	325		310		240		210
	Injection Speed	mm/sec	127		128		111		100
	Injection Stroke	mm	180		210		250		270
Mold Clamping Unit	Mold Clamping Force	Ton	110		140		180		200
	Mold Opening Stroke	mm	300		345		420		490
	Distance Between Tie Rods (H x V)	mm	360 x 360		410 x 410		460 x 460		500 x 500
	Mold Thickness	mm	120-360		130-450		160-520		180-550
	Ejector Stroke	mm	70		90		115		130
	Ejector Force	Ton	3		3.5		4		4.5
Electrical Equipment	Pump Driving Motor	HP(kw)	20 (15)		25 (18.6)		30 (22.4)		30 (22.4)
	Heater	kw	5.9		6.7		7.6		11
	Temperature Zones	zones	4		4		4		5
General	Oil Tank Capacity	l	220		240		300		450
	Machine Weight	kg	3500		4500		5800		7500
	Machine Dimension (L x W x H)	m	4.7 x 1.2 x 1.7		5.2 x 1.3 x 1.7		6.2 x 1.5 x 1.8		6.5 x 1.4 x 1.9

ITEM/MODEL		UNIT	250 MSIIA		300 MSIIA		350 MSIIA
Injection Unit	Screw Diameter	mm	55	60	60	65	65	70
	Injection Pressure	kg/cm²	2221	1867	2000	1705	1950	1670
	Theoretical Shot Volume	cm³	712	848	848	995	1128	1308
	Shot Weight Of Injection (PS)	g	635	755	755	886	1005	1165
	Injection Rate	cm³/sec	250	278	285	328	338	387
	Plasticizing Capacity (PS)	kg/hr	185	205	215	235	245	268
	Screw Rotation Speed	rpm	197		208		210
	Injection Speed	mm/sec	100		100		100
	Injection Stroke	mm	300		300		340
Mold Clamping Unit	Mold Clamping Force	Ton	250		300		350
	Mold Opening Stroke	mm	540		575		620
	Distance Between Tie Rods (H x V)	mm	550 x 550		576 x 576		630 x 630
	Mold Thickness	mm	200-550		220-620		220-640
	Ejector Stroke	mm	145		160		160
	Ejector Force	Ton	5		5.5		6
Electrical Equipment	Pump Driving Motor	HP(kw)	40 (29.8)		40 (29.8)		50 (37.3)
	Heater	kw	14		16		20.5
	Temperature Zones	zones	5		5		5
General	Oil Tank Capacity	l	550		650		750
	Machine Weight	kg	8600		10000		13500
	Machine Dimension (L x W x H)	m	6.9 x 1.5 x 1.9		7.2 x 1.6 x 1.9		7.4 x 1.7 x 1.9

Сопутствующие товары